Installing and Configuring Medical-Objects Capricorn

Version 1.0

Overview:

Provide a procedure to install and configure Medical-Objects Capricorn.

This procedure covers some parts of Medical director 2 and 3.

Install and Configure Capricorn Software

1. Download the latest Capricorn from the following link

http://download.medical-objects.com.au/

2. The link on the download page looks like the following

3. The following window will appear

4. Click on Save

5. The following Save As window will appear. Save the Setup.exe in the directory C:\MO

NOTE: If the directory does not exist create it.

6. Once you have clicked Save, the following download screens will appear

7. Uncheck [ ] Close this dialog box when download completes

8. After it has been downloaded, click Run

9. At the Security Warning, click Run

10. Once you have clicked Run, the installation process starts

11. Click Next

12. Click Next

13. Click Install

14. The following window will appear

15. The Setup wizard is now complete

16. Click Finish

Registration Process

1. Once the setup is complete you will need to enter the Token or Serial key that you will acquire from the Medical-Objects help desk

The Token or Serial Key can be emailed to you.

2. From the email, copy the token, click the blue Paste Token link

This will automatically fill in the Registration Token for you.

3. Click Enter

4. Once you have clicked Enter, the PGP Key Generation Window will appear

5. Enter pgp in lowercase into both fields. Then click Next

6. Once you have clicked Next, the following window will appear

7. At this window just type anything to make the blue bar move to 100%, then click Next

NOTE: What you type should be in lowercase.

8. Once you click Next, the following window will appear

9. Click Finish

NOTE: The main installation is now complete. The HL7 tray icon will now be shown in the system tray located at right hand bottom of the desktop.

Configuring Capricorn Software

1. Double click the HL7 Tray icon.

Note: If the Capricorn HL7 tray icon is not visible, open Capricorn from the Start Menu > All Programs > Medical-Objects > Medical Objects Capricorn or from the C:\MO\Capricorn\Capricorn.exe

2. The Log window is displayed

3. Click the Edit Server Properties icon

4. The Login screen will appear as shown below

5. Enter the following Username and Password and then click OK

Username:	SYSDBA

Password:	masterkey

NOTE: The Configuration Editor may require different settings depending on the Practice Management System used. For this case we will use settings for Medical Director 2 (MD2).

6. Click on the Integration Options. Under Ack Management set the path for acknowledgements for Medical Director 2

7. Set the ACK Management path to the local Import folder on the server or the network path on a workstation, that points to the server import folder; for example:

Medical Director 2
(Capricorn installed on the Server) --> C:\MDW2\Out\Acks\
(Capricorn installed on the Workstation) --> \\server\MDW2\Out\Acks\

Medical Director 3
(Capricorn installed on the Server) --> C:\Program Files\Health Communication network\Messages\Out\Acks\
(Capricorn installed on the Workstation) --> \\Server\HCNMSGS\Out\Acks\

8. Click on Server Parameters in the left hand side panel

9. Under Message Output Directory (main) set the results import path

10. The path can be different depending on where Capricorn is installed for example:

Medical Director 2 
(Capricorn installed on the Server) --> C:\MDW2\In\MO\
(Capricorn installed on the Workstation) --> \\server\MDW2\In\MO\

Medical Director 3
(Capricorn installed on the Server) --> C:\Program Files\Health Communication network\Messages\In\MO\
(Capricorn installed on the Workstation) --> \\Server\HCNMSGS\In\MO\

NOTE: If the folders do not exist you must create them.

11. To run the Capricorn as a Service, go to Step 15 otherwise just click OK

12. The Log screen will appear as shown below. Close the Log screen with the X in the corner of the window

13. The tray icon should appear and the installation is complete

14. To run the software as a Service you will need to go back to the Edit Server Properties window, to do this using Step 1-5 in Configuring Capricorn Software, select Service Configuration

15. Click the Install Service button

16. Click OK

NOTE: DO NOT Start the Service from here.

17. The Log screen will appear as shown below. Close the Log screen with the X in the corner of the window

18. Close the Capricorn tray icon by right clicking the icon and selecting Shutdown

19. A message will appear asking you to confirm this. Select OK

NOTE: The Capricorn tray icon should have now been closed. No red HL7 tray icon should now be visible.

20. To Start Capricorn running as a Service. Click Start > Run, then type services.msc, then click OK

21. The service console should appear as shown below

22. Scroll down until you locate Capricorn

23. To start the service, right click Capricorn and then left click Start

24. The following screen should display the starting process

25. Under Status, it should show as Started

Web Activity Report

Once the installation of Capricorn is complete a desktop icon will appear shown below.

1. Double click the desktop icon MO Delivery Report this will display new results as they arrive

NOTE: This Web Activity Report will display all results received and sent through Medical-Objects.

The Web Activity Report also has a query function that can bring up results from a particular period.

Should you require any more information or have encountered a problem please call the support helpdesk on (07) 5456 6000.